St. Charles, Missouri Zoning Map
Zoning, overlays and hazards on every parcel - and an answer to what the code actually lets you build. Compiled from current zoning data for all 24 districts.
Prefer to browse? Open the full St. Charles map ↗
What's in the St. Charles dataset
Every field below is available for any St. Charles parcel, on the map and through the AI.
Zoning
- District code & full name
- Parcel boundary & APN
- All 24 districts mapped
Building controls
- Front setback
- Side setback
- Rear setback
- Building height
Overlays, hazards & AI
- Flood hazard & environmental layers
- Ask the AI about any parcel
- Powered by live parcel data
St. Charles, Missouri Zoning Districts: What Do They Mean?
Zoning districts are areas regulated by specific laws that determine land use, building types, and development rules. Each district below shows its zone type. St. Charles's ordinance does not state permitted uses as citywide flags, so they are read from each district's own table rather than summarised here.
| Zone Code | Category | Area | Details |
|---|---|---|---|
R-1E Single Family Residential | - | 3,375.3 ac | Standards & uses → |
I-1 Light Industrial | - | 1,794.6 ac | Standards & uses → |
PD-R Planned Development Residential | - | 1,530.6 ac | Standards & uses → |
I-2 Heavy Industrial | - | 1,250.7 ac | Standards & uses → |
Showing 4 of 24 districts
Start from what you're trying to build
Each one runs against the live St. Charles dataset and returns the districts, standards and approvals involved.
What does R-1E actually permit?
The full standards for one district, read straight from the source.
Run it →How is St. Charles zoned?
St. Charles regulates land through 24 zoning districts, and the planned development family is organised by intended use: residential at roughly 1,531 acres, multi use at about 965, riverfront at roughly 239, industrial at about 95 and commercial at roughly 55.
The riverfront version is the notable one. Zoning a planned development district specifically for the riverfront rather than applying the general multi use version identifies where the city expects a distinct kind of project.
Two districts name historic areas: the Frenchtown District at roughly 40 acres and a Historic Commercial District at about 28. Naming a specific neighborhood in the roster gives that fabric its own standards.
The Zoning Pending district at roughly 120 acres is an unusually candid classification. It marks land whose designation has not been settled, so a parcel there has no operative district and the development path begins with establishing one.
The residential system uses lettered single family districts at C, D and E, with R-1E the largest at roughly 3,375 acres, plus a two family district, a multifamily district at about 442 acres, a manufactured and modular residential district at roughly 281 and a Central Residential District covering about 46.
Industrial runs light at roughly 1,795 acres and heavy at about 1,251. This is pre-development intelligence, not legal advice - verify with the local planning department before acquisition.
St. Charles zoning: frequently asked questions
How is planned development organised in St. Charles?
By intended use: residential at roughly 1,531 acres, multi use at about 965, riverfront at roughly 239, industrial at about 95 and commercial at roughly 55. The riverfront version identifies where the city expects a distinct kind of project.
What is the Zoning Pending district?
A district covering roughly 120 acres marking land whose designation has not been settled. A parcel there has no operative district, so the development path begins with establishing one.
What is the Frenchtown District?
A district covering roughly 40 acres naming that historic neighborhood specifically, alongside a Historic Commercial District at about 28 acres. Both give their fabric standards distinct from the surrounding districts.
How is single family zoning lettered?
Through districts at C, D and E, with R-1E the largest at roughly 3,375 acres and R-1C second at about 925. A two family district and a Central Residential District cover smaller areas.
How much industrial land is there?
Light industrial covers roughly 1,795 acres and heavy industrial about 1,251, together the second and fourth largest classifications in the city.
Missouri zoning maps
Analyze any St. Charles parcel in 60 seconds
Zoning, overlays, hazards, and what the code actually allows - in one place.
Zoning data is pre-development intelligence, not legal advice. Verify with the St. Charles planning department before acquisition or design.