Olathe, Kansas Zoning Map
Zoning, overlays and hazards on every parcel - and an answer to what the code actually lets you build. Compiled from current zoning data for all 50 districts.
Prefer to browse? Open the full Olathe map ↗
What's in the Olathe dataset
Every field below is available for any Olathe parcel, on the map and through the AI.
Zoning
- District code & full name
- Parcel boundary & APN
- All 50 districts mapped
Building controls
- Front setback
- Side setback
- Rear setback
- Building height
Overlays, hazards & AI
- Flood hazard & environmental layers
- Ask the AI about any parcel
- Powered by live parcel data
Olathe, Kansas Zoning Districts: What Do They Mean?
Zoning districts are areas regulated by specific laws that determine land use, building types, and development rules. Each district below shows its zone type. Olathe's ordinance does not state permitted uses as citywide flags, so they are read from each district's own table rather than summarised here.
| Zone Code | Category | Area | Details |
|---|---|---|---|
R-1 Single Family | - | 15,775.2 ac | Standards & uses → |
M-2 General Industrial | - | 3,579.1 ac | Standards & uses → |
RP-1 Planned Single Family | - | 3,384.9 ac | Standards & uses → |
AG Agricultural | - | 2,435.2 ac | Standards & uses → |
Showing 4 of 50 districts
Start from what you're trying to build
Each one runs against the live Olathe dataset and returns the districts, standards and approvals involved.
What does R-1 actually permit?
The full standards for one district, read straight from the source.
Run it →How is Olathe zoned?
Olathe regulates land through 50 zoning districts, and three systems account for the count.
The first is county legacy zoning. Districts prefixed to mark county origin appear throughout, covering rural residential at roughly 1,820 acres, one acre residential at about 650, agricultural at roughly 308 and light industrial at about 266. These are live designations on land brought into the city, and a parcel in one is not governed by a standard city district.
The second is the planned prefix, with planned versions of single family, low density multifamily, general commercial, commercial corridor and general industrial districts. Planned Single Family covers roughly 3,385 acres, the third largest classification.
The third is a combined notation where a base district carries a planned unit development suffix, such as single family combined with PUD at roughly 1,384 acres.
The conventional roster underneath is straightforward: single family at roughly 15,775 acres, the largest district by a wide margin, two family, and low and medium density multifamily. Agricultural covers about 2,435 acres.
Industrial is substantial, with general at roughly 3,579 acres, heavy at about 621 and restricted at roughly 255, plus planned variants. A Business Park district covers roughly 1,177 acres. This is pre-development intelligence, not legal advice - verify with the local planning department before acquisition.
Olathe zoning: frequently asked questions
What are the county-prefixed districts in Olathe?
Live legacy designations on land brought into the city, covering rural residential at roughly 1,820 acres, one acre residential at about 650, agricultural at roughly 308 and light industrial at about 266. A parcel in one is not governed by a standard city district.
What is the difference between a planned district and a PUD suffix?
Planned versions such as Planned Single Family are their own districts, covering roughly 3,385 acres in that case. The PUD suffix combines a base district with a planned unit development designation, as in single family combined with PUD at roughly 1,384 acres.
Which is the largest district?
Single Family at roughly 15,775 acres, more than four times the next largest classification. Planned Single Family adds about 3,385 acres more.
How much industrial land is there?
General industrial covers roughly 3,579 acres, heavy industrial about 621 and restricted industrial roughly 255, plus planned variants. A Business Park district adds about 1,177 acres.
Why does Olathe have 50 zoning districts?
Three systems compound: county legacy designations, planned versions of most base districts, and a PUD suffix that can combine with base districts as well.
Kansas zoning maps
Analyze any Olathe parcel in 60 seconds
Zoning, overlays, hazards, and what the code actually allows - in one place.
Zoning data is pre-development intelligence, not legal advice. Verify with the Olathe planning department before acquisition or design.